Where Is the Amana Furnace Filter Located and How to Replace It

The location of an Amana furnace filter varies by model and installation, but knowing where to find and how to replace it helps maintain efficiency and indoor air quality. This article explains common Amana furnace filter locations, step-by-step replacement guidance, filter sizing and MERV ratings, troubleshooting tips, and maintenance best practices to keep systems running optimally.

Amana Model Or Type Common Filter Location Notes
Upflow Gas Furnaces Return Air Plenum Or Blower Compartment Filter sometimes in a slide-out tray near blower access panel
Downflow/Counterflow Furnaces Top Or Near Return Duct Filter can be in a top-mounted slot or return grille
Horizontal Furnaces Side Panel Or Return Air Box Filter often behind side access door
Packaged Rooftop Units Outside Access Panel Or Internal Air Handler Large filters or multiple filters may be used

How Furnace Filter Location Varies By Amana Model

Amana manufactures furnaces in upflow, downflow, and horizontal configurations, and each configuration dictates filter placement. Upflow furnaces typically draw return air from the bottom and place the filter at the return plenum or inside the blower compartment. Downflow units often have the filter at the top or near the return duct. Horizontal furnaces usually locate filters behind a side access door.

Factory-installed filters may be disposable or reusable, and some installations place a filter at the return grille in the wall or ceiling instead of the unit. Identifying the configuration helps locate the filter quickly.

Common Places To Find An Amana Furnace Filter

Return Air Grille

A frequently used location is the return air grille on a wall or ceiling. Filters here are often sized to fit the grille and are easy to access for homeowners.

Return Plenum Or Return Duct

Many Amana units have filters inside the return plenum or the return duct near the furnace. These filters may sit in a slide-in slot or a filter rack attached to the plenum.

Blower Compartment Or Filter Tray

Some models locate the filter behind the blower access panel. Look for a removable panel, a slide-out tray, or a small foam gasket that seals the filter area.

Call 888-906-9139 – Get Your Free HVAC Quote & Save More Today!

Top Or Side Slots

Downflow and horizontal furnaces often have top-mounted or side-mounted filter slots. These slots accept standard-sized filters and sometimes use a latch or magnetic strip to secure the panel.

Step-By-Step: Locating The Filter On Common Amana Units

Before starting, turn off power to the furnace at the thermostat and the service switch to ensure safety. Keep a flashlight and screwdriver handy for access panels.

  1. Inspect The Return Grille: Remove screws or pop off the grille; the filter may be directly behind it.
  2. Check The Blower Compartment: Open the blower access panel; look for a rectangular filter slot or tray near the blower assembly.
  3. Examine The Return Plenum: Follow the ductwork into the furnace cabinet and find a filter rack or slide-in slot on the plenum wall.
  4. Search Top And Side Panels: For downflow or horizontal units, look at the top or side panels for removable slots or doors.
  5. Consult The Manual: If identification remains unclear, check the furnace’s installation manual or model sticker for filter guidance.

How To Replace An Amana Furnace Filter: Tools And Steps

Replacing a furnace filter is simple if the location is known. Use the correct filter size and mind airflow direction stated on the filter frame. Typical supplies needed are a replacement filter, gloves, and a flashlight.

Replacement Steps

  1. Power Off The System: Switch off the furnace power and thermostat to avoid the burner or fan starting while hands are inside the cabinet.
  2. Open The Access Panel: Remove screws or unlatch the filter access door and carefully set the panel aside.
  3. Note Filter Orientation: Look for arrows indicating airflow direction; this must face into the furnace or toward the blower.
  4. Remove Old Filter: Slide the filter out, minimizing dust disturbance. Inspect for dirt pattern and any debris in the filter slot.
  5. Clean The Area: Wipe the frame and surrounding opening with a dry cloth or vacuum briefly to remove loose dust.
  6. Insert New Filter: Place the new filter with arrows aligned to the airflow direction and ensure a snug fit without gaps.
  7. Close The Panel And Restore Power: Reinstall panels or grilles, tighten screws, and turn the furnace power back on.

Choosing The Right Filter Size And Type For Amana Furnaces

Filters are sized by measurements printed on the filter frame: length, width, and thickness. Common sizes include 16x25x1, 20x20x1, and 16x20x1. For Amana furnaces, using the manufacturer-recommended size prevents air bypass and maintains efficiency.

Filter types range from basic fiberglass to pleated and high-efficiency models. Disposable pleated filters are popular for balance of cost and performance. Reusable washable filters are available but must be cleaned regularly and can affect airflow if not maintained.

MERV Ratings, Indoor Air Quality, And Furnace Performance

MERV (Minimum Efficiency Reporting Value) measures a filter’s ability to capture particles. Higher MERV ratings capture smaller particles but can restrict airflow if the furnace blower isn’t sized for the added resistance.

Call 888-906-9139 – Get Your Free HVAC Quote & Save More Today!
  • MERV 1–4: Basic filtration (large particles); low resistance.
  • MERV 6–8: Improved residential filtration; good balance.
  • MERV 9–12: High-quality residential/low commercial; captures finer particles.
  • MERV 13–16: Hospital-grade; may require upgraded HVAC components.

For most Amana residential furnaces, MERV 8–11 offers a strong balance between air quality and system performance. Consult an HVAC technician before upgrading to very high MERV filters.

Maintenance Schedule And Best Practices

Regular filter checks prolong furnace life and maintain efficiency. As a baseline, check filters every 30 days. Replace disposable pleated filters every 1–3 months depending on usage and household conditions.

Factors that speed up replacement include pets, smoking, high pollen, and renovation dust. During heavy usage months, monitor pressure drop across the filter or note reduced airflow to determine earlier replacement.

Troubleshooting: Filter-Related Problems And Solutions

Reduced Airflow

Clogged filters cause reduced airflow, longer run times, and cycling issues. Inspect and replace filters first before investigating other components.

Frozen Evaporator Coils

Restricted airflow can cause indoor coil freezing in heat pump systems. If coils appear iced, power down the system and replace a clogged filter before restarting. Call a technician if icing recurs.

Higher Energy Bills

Dirty filters force furnaces to work harder, increasing energy usage. Regular filter changes typically reduce utility costs and improve comfort.

Dusty Home

Persistent dust might indicate low-quality filtration, bypass around the filter, or leaks in ductwork. Verify filter fits snugly and consider improving MERV rating or sealing ducts.

When To Call An HVAC Professional

Contact a technician if replacing the filter doesn’t restore proper airflow or if strange noises, odors, or frequent cycling persist. Technicians can inspect blower motors, duct leaks, and control issues that filters alone won’t resolve.

Professional maintenance often includes filter inspection, coil cleaning, blower checks, and verifying correct filter size and placement for the specific Amana model.

Tips For Finding The Exact Amana Filter Location Quickly

  • Check The Serial/Model Sticker: It often lists configuration and filter instructions or directs to the manual.
  • Use The Manual Or Manufacturer Website: Amana provides model-specific service manuals with diagrams showing filter placement.
  • Look For Arrows Or Foam Seals: Filter access points typically have arrows, sealing gaskets, or a labeled door.
  • Search The Return Duct Path: Follow the return air path from the grille back to the furnace to find the filter slot.
  • Take A Photo: When replacing, photograph the filter orientation for future reference.

Additional Considerations For Packaged Rooftop And Multi-Filter Systems

Rooftop units or large packaged systems may use multiple filters or larger media filters. Access panels on these units are often labeled and secured with service screws. Always shut down power and follow lockout/tagout procedures when servicing rooftop equipment.

Large systems may use filter banks that require balanced replacement to avoid uneven airflow. For these systems, follow manufacturer’s guidance or schedule professional maintenance.

Replacement Filter Brands And Where To Buy

Compatible filter brands include Amana-branded filters, Filtrete, Honeywell, and generic HVAC supplies. Purchase from HVAC distributors, home improvement stores, or online retailers. Ensure the replacement matches the exact dimensions and desired MERV rating.

Where To Buy Pros Cons
Manufacturer Or Authorized Dealer Correct fit and OEM recommendations May cost more
Home Improvement Stores Convenient, wide selection Quality varies
Online Retailers Competitive pricing, bulk options Verify dimensions carefully

Safety And Warranty Notes

Always turn off power to the furnace before opening access panels. Replacing filters is typically a homeowner task, but any interior furnace work beyond filter replacement may void warranties if done improperly. Review warranty terms and consult an authorized Amana service provider for any covered repairs or maintenance tasks.

Key Takeaways On Amana Furnace Filter Location

Filter location differs by Amana furnace type: return grille, plenum, blower compartment, or top/side slots. Identifying configuration, following airflow arrows, and using correct filter size and MERV rating are critical.

Regular inspection—every 30 days—and timely replacement preserve efficiency, lower energy costs, and improve indoor air quality. For persistent problems, professional HVAC service ensures correct diagnosis and system longevity.

Scroll to Top