Ruud Ultra Series UA20 Price Estimates and Installation Costs 2026

The Ruud Econet Ultra Series UA20 price depends on capacity, efficiency, and whether buyers buy the furnace only or a full install with EcoNet controls. Typical total cost ranges reflect unit model (60,000–120,000 BTU), AFUE rating, and regional labor rates.

Typical Total Price Buyers Pay For A UA20 Furnace

Buyers usually pay between $1,200 and $3,800 for a Ruud Ultra Series UA20 furnace alone and $2,800-$8,500 installed. Average installed price across the U.S. is about $4,800 for a straightforward replacement.

Assumptions: 80–96% AFUE UA20 variants, 80k–100k BTU capacity suitable for 1,800–2,500 sq ft homes, normal access, no major ductwork changes.

Breakdown Of Major Quote Components For UA20 Replacement

Materials include the furnace, venting, filter, and any new gas connectors or flue components.

Assumptions: labor 4–12 hours, hourly rates $75-$125 per hour.

How Capacity And AFUE Rating Affect The Final Price

UA20 models range roughly 60k–120k BTU and typically 80%–96% AFUE for different variants. Expect $200–$1,200 extra for higher-capacity or higher-AFUE models.

Example thresholds: 60k–80k BTU (small homes) usually fall at the low end; 90k–120k BTU (larger homes or colder climates) push toward the high end. Upgrading from 80% AFUE to 96% can add $500–$1,200 for the unit itself.

Site Conditions And Installation Variables That Change Quotes

Key variables include ductwork condition, venting type, gas line access, and multi-level runs. Major duct repairs or adding a new gas regulator often add $700–$2,500.

Numeric examples: replacing 50–200 linear feet of ductwork: $4–$12 per linear foot for basic repairs; adding a new gas line run over 20 ft: $300–$900; converting to direct venting or installing a power vent: $400–$1,200 extra.

Ways To Reduce UA20 Purchase And Installation Price

Buyers can control scope: keep existing compatible ductwork, schedule replacement off-peak, and accept a standard thermostat. Comparing 3 local quotes and avoiding unnecessary upsells often saves 8%–18%.

Other tactics: provide clear access to the unit to reduce crew hours, accept manufacturer-standard cabinet color/finish, and bundle furnace replacement with an AC tune-up to get contractor discounts.

Regional Price Differences And Seasonal Timing Effects

Prices vary by region: expect +10% to +25% in high-cost West Coast and Northeast metro areas and -5% to -12% in rural Midwest and parts of the South. Install demand spikes in fall/winter can raise installed quotes by 10%–30%.

Assumptions: regional delta estimates based on typical U.S. labor and overhead variances.

Common Add‑Ons, Warranties, And EcoNet Thermostat Costs

EcoNet thermostat integration typically adds $150–$650 depending on whether a smart controller is new or replacing an existing compatible thermostat.

Three Realistic Quote Examples For A UA20 Replacement

These examples show how capacity, AFUE, and site work drive labor and total installed price.