Typical Rheem TXV valve replacement cost ranges from $250 to $900 depending on parts, refrigerant, and labor. This article gives realistic Rheem TXV valve replacement price estimates and the main drivers that change a quote so buyers can budget and compare quotes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Complete TXV replacement (parts + labor) | $250 | $450 | $900 | Assumptions: split-system, R-410A, 1–2 hours labor, accessible valve. |
| Parts only (Rheem OEM TXV) | $60 | $150 | $350 | Assumptions: model-specific valve, aftermarket vs OEM. |
| Labor (technician) | $75 | $110 | $150 | Assumptions: per hour, includes evacuation and recharge. |
| Refrigerant recharge | $40 | $100 | $300 | Assumptions: price varies by type and pounds required. |
Rheem TXV Valve Replacement Total Price Estimates
Most homeowners pay between $250 and $900 for a full Rheem TXV valve replacement, with $450 being a typical mid-range quote.
Common total-price scenarios: basic replacement with leftover refrigerant and easy access: $250-$400; replacement requiring evacuation, vacuum, and recharge: $400-$650; hard-to-reach valve or system retrofit and high-cost refrigerant: $650-$900+. Assumptions: 2–4 ton residential split system, R-410A or R-22 considerations, normal access.
Line-Item Pricing: Parts, Labor, Equipment, Permits, Disposal
A realistic quote splits into parts, technician labor, equipment use, permits (rare), and disposal or recovery charges.
| Materials | Labor | Equipment | Permits | Delivery/Disposal |
|---|---|---|---|---|
| $60-$350 (valve, fittings, filter drier) | $75-$150/hr; 1-3 hrs () | $40-$120 (vacuum pump rental/use, gauges) | $0-$150 (local codes, rarely needed) | $10-$50 (old parts, oil containment) |
How System Size, Refrigerant Type, and Accessibility Change the Quote
System tonnage, refrigerant type, and physical access are the strongest variables affecting price.
Examples: small 1.5–2 ton unit with easy access: add $0-$80 to base parts; 3–5 ton systems typically add $50-$150 due to larger fittings. If system uses R-22 (phase-out), expect refrigerant recharge costs to jump: <$100 for R-410A vs $150-$300+ for R-22 per service refill. Long line sets, buried valves, or rooftop units add 1–3 hours labor and $100-$300 extra.
Ways To Lower Rheem TXV Replacement Price Without Risking Performance
Control scope and timing to lower cost: replace only the TXV when the rest of the metering device and pipes are confirmed good.
Cost-saving actions: schedule service in off-peak seasons for lower labor rates, provide clear access to the outdoor unit to reduce crew time, accept a quality aftermarket valve instead of OEM to save $50-$150, and bundle related work (filter drier, pressure test) for better per-item rates. Avoid cutting corners on evacuation and leak repair; those can double future costs.
Regional Price Differences and What To Expect in Major U.S. Markets
Prices vary by roughly ±20–40% between low-cost and high-cost metro areas.
Typical regional deltas: Midwest and South markets: 0%-20% below national average; West Coast and Northeast urban markets: 10%-40% above average. Example: a $450 average in the Midwest may be $540-$630 in San Francisco or New York due to labor and business overhead.
Typical Labor Time, Crew Size, and What Technicians Charge
Most TXV replacements take 1–3 hours and are handled by a single HVAC technician.
Labor breakdown: diagnostic and leak check 0.5–1 hour; valve swap and brazing 0.5–1.5 hours; evacuation, vacuum, and recharge 0.5–1.5 hours. Expect 1–3 total labor hours at $75-$150 per hour. Assumptions: single technician and normal site access.
Real-World Quote Examples With Specs and Pricing
Three representative quotes illustrate how scope changes totals.
| Scenario | Specs | Labor | Parts | Total |
|---|---|---|---|---|
| Simple swap | 2-ton, R-410A, easy access | 1 hr @ $90 | $95 valve + $20 filter | $205-$285 |
| Standard service | 3-ton, evacuation & recharge, filter | 2.5 hrs @ $100 | $140 valve + $35 filter | $415-$500 |
| Complex rooftop | 4-ton, R-22, long lines, access lift | 3.5 hrs @ $120 | $250 valve + $60 filter + refrigerant | $760-$1,050 |
Common Add-Ons, Fees, and Permit Triggers That Increase Final Price
Expect extra charges for refrigerant by weight, leak repair, brazing in tight spaces, or required permits.
Typical add-ons: refrigerant refill $40-$300 depending on type and pounds; leak repair $100-$600 depending on extent; brazing with nitrogen purge $50-$150; permit/inspection $0-$150 if local authority requires refrigerant work documentation.