NTI FTVN 150 Price and Installed Cost Estimates 2026

The NTI FTVN 150 price typically runs from the cost of the bare boiler to the all-in installed system; buyers usually pay between $4,000 and $18,000 depending on scope. This article gives unit pricing, installed ranges, and the main variables that change the final cost so readers can compare quotes and plan a budget.

Typical Purchase and Installed Price For An NTI FTVN 150

Buyers replacing a single boiler in a home or small commercial space should budget $7,000-$15,500 for a full install including the NTI FTVN 150.

Unit-only pricing for the FTVN 150 generally falls between $3,200 and $6,500 depending on dealer discounts and whether controls or a longer warranty are included. Installed totals depend on labor difficulty, venting, and system complexity: a straight swap with existing piping is near the low end; conversions to new flue or gas line work push to the high end. Assumptions: suburban U.S., normal access, single-floor mechanical room.

Breakdown Of Quote Line Items: Materials, Labor, and Equipment

Most quotes separate the price into materials, labor, equipment, and permits—expect the unit to be about 30%-50% of an installed quote.

Typical labor rates are $75-$150 per hour depending on the region and technician level. For a straight replacement expect 10-18 hours; complex installs can require 20-40+ hours.

Which Variables Move The NTI FTVN 150 Price Most

Venting type, gas line upgrades, and control scope are the biggest price drivers for the FTVN 150.

Examples with numeric thresholds: switching from existing common venting to PVC/condensing direct venting adds $800-$2,500; upgrading a 1/2″ gas feed to a 1″ line (required for longer runs or higher BTU totals) costs $300-$1,200. Adding building controls or cascade paneling for multiple boilers typically adds $1,000-$4,000 depending on features.

How To Reduce The NTI FTVN 150 Installed Price Without Sacrificing Safety

Control scope, schedule during off-season, and provide clear access to the mechanical room to lower labor hours and total price.

Practical tactics: keep existing compatible venting and piping where safe to do so, compare 3-5 local HVAC bids, accept standard manufacturer warranty rather than extended unless needed, and bundle boiler replacement with related work (hot water tank, controls) to reduce mobilization fees.

Regional Price Differences For Buying Or Installing An NTI FTVN 150

Expect 10%-30% higher installed prices in large coastal metros compared with the Midwest or South due to labor and permit costs.

Typical deltas: Midwest baseline; Northeast/West Coast +15%-30%; Sun Belt +5%-15%; rural areas can be -5%-10% but may include travel minimums. Assumptions: similar home size and installation complexity.

Typical Labor Time, Crew Size, And Scheduling For An FTVN 150 Swap

A standard replacement crew is 2 technicians and usually takes 10-18 hours; complex jobs extend to 2-4 days.

Labor estimate examples: straight swap 10-12 hours; venting and gas upgrade 16-24 hours; full piping and control replacement 24-40 hours. Factor in permit and inspection turnaround (1-14 days) when planning timelines.

Three Real-World Quote Examples With Specs And Totals

Concrete examples help translate per-unit costs into realistic budgets for different scenarios.