Buyers replacing both a Goodman gas furnace and an air conditioner should expect a wide price range driven by unit size, efficiency, and installation complexity; this Goodman furnace AC combo price article summarizes typical totals and the biggest cost drivers. Assumptions: suburban U.S. single-family home, standard ductwork, mid-efficiency models.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Goodman Furnace + AC Combo (Total Installed) | $3,800 | $6,500 | $10,500 | Ranges depend on tonnage, AFUE/SEER, and labor access |
| Equipment Only (furnace + condensing unit) | $2,200 | $4,250 | $7,400 | Mid-efficiency units typical |
| Labor & Install | $1,200 | $2,200 | $3,500 | Includes typical 6-12 hour install; |
| Removal & Disposal | $150 | $350 | $750 | May include refrigerant recovery fee |
Total Price For a Goodman Furnace + AC Combo (Typical Home)
Most U.S. homeowners pay about $4,000-$9,500 to replace both a Goodman furnace and AC with mid-range models and a straight swap. Typical installed totals: $3,800-$10,500 depending on capacity and installation complexity.
Average combo pricing assumes a 2.5–3.5 ton AC, 80%–95% AFUE furnace, and accessible attic/basement. Assumptions: Midwest labor rates, standard line set length, no major ductwork changes.
Breakdown: Equipment, Labor, Permits and Disposal
| Cost Component | Low | Average | High |
|---|---|---|---|
| Equipment (furnace + condenser) | $2,000 | $4,000 | $7,000 |
| Labor (install crew) | $800 | $2,000 | $3,500 |
| Permits & Inspections | $0 | $150 | $500 |
| Delivery/Disposal & Refrigerant Recovery | $150 | $350 | $800 |
| Accessories (thermostat, pads, lines) | $50 | $250 | $900 |
Equipment and labor usually make up 80%-90% of the total quote.
How Unit Size (Tons) and AFUE Change The Quote
AC tonnage major impact: a 2-ton to 5-ton Goodman condensing unit typically costs $1,500-$3,500 (equipment only). Expect roughly $900-$1,200 per additional ton in equipment cost and higher labor for larger units.
Furnace efficiency affects price: 80% AFUE Goodman furnaces run about $700-$1,300, while 95%+ models cost $1,700-$3,000. Thresholds: switching from 80% to 95% AFUE often adds $800-$1,500 to equipment price and may need different venting.
Ways To Lower Goodman Combo Price Without Sacrificing Safety
Choose a slightly lower SEER/AFUE tier if current ductwork is older; installing premium efficiency on a leaky duct system yields limited returns. Scope-control—replace like-for-like tonnage and avoid unnecessary upsized units—cuts $800-$2,000.
Prepare the site: clear access, remove furniture, and provide a dedicated breaker to reduce install time. Comparing 3-5 local HVAC quotes and asking for itemized bids typically lowers the final contractor markup.
Regional Price Differences Across U.S. Markets
| Region | Typical Installed Range | Delta vs National Average |
|---|---|---|
| Northeast (urban) | $5,500-$11,000 | +10% to +30% |
| Midwest (suburban) | $4,000-$8,500 | -5% to +5% |
| South (high demand summer) | $4,200-$9,800 | 0% to +20% |
| West (coastal/metro) | $5,000-$11,500 | +10% to +35% |
Labor and permitting explain most regional deltas; expect 10%-35% higher totals in dense metro and coastal areas.
Common Add-Ons, Removal Fees, and Warranty Costs
| Item | Typical Fee | Notes |
|---|---|---|
| Refrigerant recharge (if needed) | $100-$600 | R-410A vs reclaimed refrigerant affects cost |
| Old-system disposal | $75-$300 | Includes refrigerant recovery |
| Extended warranty | $150-$600 | Often sold as 5-10 year parts/labor |
| Duct sealing or repair | $300-$1,200 | Recommended if >15% leakage |
Budget for $150-$1,200 of add-ons depending on system condition and warranty choices.
Three Real-World Quote Examples With Specs and Pricing
Example 1: Small home swap — 2.0 ton AC + 80% AFUE furnace, equipment $2,300, labor $1,000, disposal $150, total $3,450. Good for tight budgets and functional ductwork.
Example 2: Typical 2,5–3.0 ton replacement — mid-efficiency 14 SEER/95% AFUE, equipment $4,500, labor $2,000, permits $200, total $6,700. The most common mid-range combo buyers see.
Example 3: High-efficiency upgrade — 3.5 ton AC 16+ SEER + 98% AFUE furnace, equipment $7,200, labor $3,000, duct upgrades $900, total $11,100. Higher efficiency and duct work drive the top-end price.