The following guide explains typical Day and Night furnace prices, installation costs, and factors that influence overall expense to help homeowners make informed choices when shopping for a replacement or new installation.
| Furnace Type | Unit Price Range | Installed Price Range |
|---|---|---|
| Gas High-Efficiency (AFUE 90%+) | $1,200 – $3,500 | $3,000 – $7,000 |
| Gas Standard (AFUE 80%–89%) | $800 – $2,000 | $2,500 – $5,500 |
| Electric Furnace | $600 – $2,000 | $1,500 – $4,000 |
| Oil Furnace | $1,500 – $4,000 | $3,000 – $7,500 |
What Does “Day And Night” Mean For Furnaces
“Day And Night” is a brand historically sold through major HVAC distributors and retailers and known for reliable mid-range furnaces. The brand offers gas, oil, and electric models with various efficiency levels and features. Pricing for Day And Night models aligns with industry norms for similar efficiency and capacity rather than premium-priced brands.
Typical Price Ranges For Day And Night Furnaces
Gas Furnaces
Day And Night gas furnaces come in standard and high-efficiency models. Standard-efficiency models (AFUE 80%–89%) are usually on the lower end of the price spectrum. High-efficiency models (AFUE 90%+) cost more but provide energy savings that often offset the higher upfront cost over several years.
Unit Price: $800–$3,500. Installed Price: $2,500–$7,000. Regional labor rates, venting complexity, and required gas-line work cause wide variation.
Electric Furnaces
Electric furnaces typically have lower equipment costs but can yield higher operating costs depending on electricity rates. Electric Day And Night models are simple to install when suitable electrical service is present.
Unit Price: $600–$2,000. Installed Price: $1,500–$4,000. Installation is cheaper when no gas connections or flue modifications are needed.
Oil Furnaces
Oil models remain in use where gas is unavailable. Day And Night oil furnaces vary by burner technology and efficiency. They tend to be pricier to operate than gas but may be practical for certain homes.
Unit Price: $1,500–$4,000. Installed Price: $3,000–$7,500. Tank replacement, piping, and chimney liners add to costs when present.
Factors That Drive Day And Night Furnace Prices
Heating Capacity (Tonnage/BTU)
Furnace capacity measured in BTU/hr must match home heating load. Larger capacity units cost more. Oversizing leads to short cycling while undersizing leaves the home underheated, so correct sizing affects both comfort and long-term cost.
Efficiency Rating (AFUE)
AFUE indicates fuel-to-heat conversion efficiency. Higher AFUE models cost more up front but can significantly reduce annual fuel costs. A 95% AFUE gas furnace uses far less fuel than an 80% unit for the same heat output.
Installation Complexity
Complex installations raise labor and material costs. Common complexities include upgrading ductwork, changing venting type from atmospheric to direct vent, adding a new gas line, or modifying the home’s electrical service for electric units.
Geographic Labor Rates
Labor rates differ between metro areas and rural regions. Local permitting requirements and inspection fees also add to the installed price. Urban areas typically show higher installed prices than suburban or rural markets.
Warranty And Additional Features
Extended warranties and advanced features such as variable-speed blowers, two-stage burners, or modulating gas valves increase the price. Day And Night offers warranty options; transferring or extending warranties may cost more.
How To Estimate A Fair Installed Price
Start with comparable quotes: obtain at least three estimates from licensed HVAC contractors. Ensure each quote lists the furnace model, AFUE, estimated airflow (CFM), labor hours, and included materials.
Compare incremental costs such as permit fees, duct sealing, condensate drains, thermostats, and disposal of the old unit. Ask for a detailed line-item breakdown to avoid surprises when bills arrive.
Sizing: Matching Furnace Capacity To Home Needs
Proper furnace sizing relies on a Manual J load calculation that considers insulation levels, window types, building orientation, and occupancy. Contractors using rules-of-thumb or square-foot estimates risk oversizing equipment.
Day And Night furnaces are available in a range of sizes; a properly sized unit improves efficiency and reduces wear. Homeowners should request a Manual J report and refuse installations based on rough estimates alone.
Installation Timeline And Process
Typical installations require 1–3 days for straightforward replacements. Complex setups involving ductwork, gas piping, or vent changes can take longer. Contractors should schedule an on-site inspection before finalizing the installation date and price.
Running Costs: Fuel, Maintenance, And Efficiency
Operating costs depend on fuel prices and AFUE. A higher AFUE gas furnace reduces fuel consumption. Electric furnaces have near-100% efficiency at the unit but may cost more due to electricity rates.
Routine maintenance including annual tune-ups, filter changes, and duct cleaning sustains efficiency and extends the lifespan. Budget for annual maintenance, typically $75–$200, depending on service scope.
Rebates, Tax Credits, And Incentives
Federal and state incentives sometimes apply to high-efficiency furnaces or heat pumps. Utilities may offer rebates for models meeting specific efficiency criteria or for contractors who perform energy audits.
Check the ENERGY STAR website, local utility programs, and IRS guidance for applicable tax credits. Incentives can reduce net purchase cost by several hundred to over a thousand dollars for qualifying systems.
Choosing A Contractor For Day And Night Furnace Installation
Select licensed HVAC contractors with experience installing Day And Night units. Verify references, insurance, and local licensing. A reputable contractor provides written estimates, warranty details, and a timeline.
Ask about post-installation support and what is included in the labor warranty. Contractors who offer maintenance plans can simplify long-term upkeep and often detect issues earlier.
Comparing Day And Night To Other Brands
Day And Night typically competes in the mid-range segment. It offers reliable basic features without premium pricing found with some high-end brands. For similar AFUE and capacity, prices are often competitive.
When comparing, look at blower motor type, heat exchanger warranty, and expected lifespan. Equivalent models from other manufacturers may differ in warranty length, parts availability, and dealer network coverage.
Common Upgrades And Their Costs
- Smart Thermostat: $150–$350 installed, improves control and can save energy.
- Variable-Speed Blower: $300–$900 extra, enhances comfort and efficiency.
- New Ductwork or Sealing: $500–$5,000 depending on extent, often improves overall system performance.
- Condensing Furnace Venting: $200–$1,000, necessary for high-efficiency furnaces with PVC venting.
When To Replace Versus Repair
Consider replacement when the furnace is over 15–20 years old, requires frequent costly repairs, or operates below 80% AFUE. A repair that costs over 50% of the replacement-installed price usually warrants replacement.
Replacing an older low-efficiency furnace with a Day And Night high-efficiency model may yield energy savings sufficient to amortize the upgrade within several years.
Warranty And Longevity Expectations
Day And Night furnaces generally offer limited manufacturer warranties for parts and heat exchangers. Typical heat exchanger warranties range from 10 years to lifetime on some higher-end models. Registration of the product with the manufacturer is often required to secure full warranty benefits.
Expected lifespan for a well-maintained furnace is 15–20 years. Regular maintenance and timely repairs prolong useful life.
Tips To Lower Total Cost
- Shop multiple licensed contractors and compare detailed quotes.
- Consider off-peak installation timing for potential seasonal discounts.
- Qualify for rebates by choosing ENERGY STAR-certified or high-AFUE models.
- Bundle furnace replacement with other energy improvements to unlock additional incentives.
- Opt for a maintenance plan to avoid costly emergency repairs and sustain efficiency.
Frequently Asked Questions About Day And Night Furnace Pricing
How Much Should A Day And Night Furnace Cost Installed?
Installed prices typically range from $1,500 for a basic electric replacement to $7,500 for a high-capacity, high-efficiency gas or oil system with complex installation needs.
Are Day And Night Furnaces Good Value?
They are generally considered good value in the mid-market segment, offering reliable performance without premium pricing. Value depends on matching the model to the home’s needs and ensuring proper installation.
How Long Does Installation Take?
A straightforward furnace swap usually takes one day. More complex installs requiring ductwork modifications, new venting, or gas-line work can take two to three days or longer.
Can Replacing A Furnace Save Money On Utility Bills?
Yes. Replacing a low-efficiency furnace with a high-AFUE Day And Night model can lower fuel consumption significantly. Actual savings vary based on fuel prices, climate, and usage patterns.
Resources And Next Steps
Obtain at least three in-home estimates, request a Manual J load calculation, verify contractor credentials, and confirm warranty terms before purchase. Homeowners should also check local utility rebates and federal or state incentives to reduce net cost.
For an accurate price, schedule an on-site evaluation with a licensed HVAC professional who can assess ductwork, venting, and electrical or gas requirements specific to the property. Strong documentation and clear warranty terms protect the homeowner and ensure long-term satisfaction.