Amana two-stage furnaces offer improved comfort and efficiency by running at a lower output for most heating needs and stepping up to full power when required. This article explains typical Amana two-stage furnace prices, factors affecting cost, installation and operating expenses, and tips to get the best value when shopping for a two-stage Amana furnace.
| Model Series | AFUE Range | Typical Price Range (Unit Only) | Notes |
|---|---|---|---|
| AMVC/AMVC90 | 96% | $1,200 – $2,200 | High-efficiency, variable-capable models |
| AMVM/AMVM95 | 95% | $1,000 – $1,900 | Popular two-stage mid/high efficiency |
| AMDB/AMDB80 | 80% | $700 – $1,400 | Economical two-stage options |
What Is A Two-Stage Furnace And Why It Matters
A two-stage furnace can operate at two levels: a lower, steady stage for moderate heating loads and a higher stage for cold snaps. This results in more consistent temperatures, quieter operation, and often higher efficiency compared with single-stage units. Amana’s two-stage models target homeowners who want better comfort without the full cost of modulating systems.
Typical Price Components For Amana Two-Stage Furnaces
When assessing Amana two-stage furnace prices, several components shape the total cost. The price shown below is a breakdown of what customers typically pay:
- Equipment Cost: Manufacturer Suggested Retail Price (MSRP) or dealer price for the furnace unit.
- Installation Labor: Contractor time for removal of old system, duct connections, gas line checks, venting, and electrical work.
- Materials And Add-Ons: Thermostats, condensate pumps, flues, vents, new filters, and optional Wi-Fi thermostats.
- Permit And Inspection Fees: Local codes may require permits and inspections.
- Warranty Upgrades: Extended warranties or ductwork guarantees may increase upfront cost.
Price Ranges By Efficiency And Model
Amana’s two-stage furnace prices vary by AFUE (Annual Fuel Utilization Efficiency) and model series. The following ranges reflect unit-only pricing and typical installed pricing ranges observed in the U.S. market.
High-Efficiency Two-Stage (95%+ AFUE)
Models with AFUE ratings of 95–97% belong to Amana’s high-efficiency lineup. Unit prices for these models commonly range from $1,000 to $2,200. Installed costs typically run from $3,000 to $6,000 depending on home size, existing ductwork, and region.
Mid-Efficiency Two-Stage (90% AFUE)
Mid-efficiency Amana two-stage furnaces with AFUE around 90–95% often show unit prices near $900 to $1,700. Installed costs normally range from $2,500 to $5,000.
Economy Two-Stage (80% AFUE)
Budget-friendly two-stage furnaces with ~80% AFUE have lower upfront equipment prices, usually $700 to $1,400 for the unit. Total installed costs can vary from $2,000 to $4,000 but will yield higher annual fuel costs compared to higher AFUE units.
Factors That Drive The Final Installed Price
Several site-specific and product-specific factors influence the final Amana two-stage furnace price. Understanding these helps buyers evaluate quotes accurately.
- Home Size And Heat Load: Larger homes or poorly insulated homes may require larger-capacity furnaces or multiple zones, increasing cost.
- Existing Ductwork Condition: Damaged or poorly sealed ducts may require repair or replacement, adding to installation bills.
- Venting Type: High-efficiency units often need PVC condensate vents, while lower-efficiency models use metal flues; venting complexity affects labor and material costs.
- Thermostat And Controls: Upgrading to a smart or communicating thermostat increases equipment cost but improves system performance.
- Labor Rates: Local contractor hourly rates vary across states and metro areas and may be the largest variable in final pricing.
- Permits And Local Codes: Additional requirements can add expense and time to installations.
Operating Cost Comparison: Two-Stage Vs Single-Stage
Two-stage furnaces save energy by running at a lower stage most of the time. Over a heating season, an Amana two-stage furnace can reduce runtime cycles and improve temperature stability.
| Metric | Two-Stage Furnace | Single-Stage Furnace |
|---|---|---|
| Typical Annual Fuel Use | Lower (varies by AFUE) | Higher |
| Comfort | More Consistent | More Temperature Swings |
| Noise | Quieter | Louder During On Cycles |
Exact savings depend on fuel prices, AFUE rating, and household thermostat settings. Homeowners in regions with long heating seasons typically see faster payback on higher-efficiency two-stage units.
How To Evaluate Quotes For An Amana Two-Stage Furnace
When reviewing contractor quotes, compare apples to apples using this checklist:
- Model number and AFUE—verify the exact Amana model and efficiency rating.
- Scope of work—does the price include removal, disposal, permits, and testing?
- Materials list—confirm vents, filters, thermostat, and controls are included.
- Labor warranty and equipment warranty—ask about length and what’s covered.
- Ductwork inspection—ensure the contractor tests for leaks and airflow performance.
Ask for three written quotes and request itemized pricing for equipment, labor, and materials to identify where savings or extra costs occur.
Incentives, Rebates, And Financing Options
Many utilities and government programs offer incentives for high-efficiency heating systems. These can materially lower the out-of-pocket cost for Amana two-stage furnaces.
- Federal And State Rebates: Occasionally available for high-efficiency furnaces and heat pumps—check state energy office websites.
- Utility Company Rebates: Local gas and electric utilities sometimes provide rebates for higher AFUE equipment or mid-stream discounts.
- Manufacturer Promotions: Amana or affiliated dealers may offer seasonal promotions or extended warranty deals.
- Financing: Many HVAC dealers offer 0% financing or low-interest plans to spread the cost of installation.
Buyers should verify eligibility and apply before purchase if required. Rebates can reduce the net installed cost by several hundred dollars for qualifying systems.
Maintenance And Long-Term Cost Considerations
Proper maintenance maximizes efficiency and extends service life, affecting lifetime cost more than small differences in initial price.
- Schedule annual professional tune-ups to maintain AFUE and ensure safe operation.
- Replace filters regularly to preserve airflow and furnace longevity.
- Seal and insulate ducts to reduce heat loss and improve performance.
- Consider a service plan for discounted repairs and priority scheduling.
Regular maintenance can prevent costly breakdowns and preserve warranty coverage, making it a valuable investment alongside the initial purchase.
Where To Buy And How To Choose A Contractor
Amana two-stage furnaces are sold through authorized dealers and HVAC contractors. Choosing the right installer matters as much as selecting the unit.
- Authorized Dealers: Ensure the dealer is authorized by Amana for warranty registration and service.
- Licensed And Insured Contractors: Verify credentials, local licenses, and insurance before signing a contract.
- References And Reviews: Check online reviews and ask for recent local references.
- Detailed Written Contract: Insist on an itemized contract and clear warranty transferability terms.
Choosing an experienced contractor helps ensure proper sizing, correct venting and combustion setup, and smooth warranty registration.
Common Questions About Amana Two-Stage Furnace Prices
Are Amana Two-Stage Furnaces Expensive To Run?
Operating cost depends on AFUE and local fuel prices. A higher AFUE Amana two-stage furnace costs more up front but typically uses less fuel, lowering annual operating expenses.
Is It Worth Upgrading From Single-Stage To Two-Stage?
Many homeowners find value in upgrading for improved comfort and reduced temperature swings. Payback depends on climate, current energy costs, and how well the existing system operates.
How Long Do Amana Furnaces Last?
With proper maintenance, Amana furnaces typically last 15–20 years. Two-stage models with regular service can achieve the higher end of that range.
Practical Tips To Lower The Cost Of An Amana Two-Stage Furnace
- Buy during seasonal sales when dealers offer discounts or bundled promotions.
- Shop multiple quotes and compare model numbers and included services.
- Ask about manufacturer rebates, utility incentives, and tax credits.
- Consider financing promotions to manage cash flow while preserving comfort.
- Invest in duct sealing and insulation to reduce required capacity and ongoing fuel costs.
Combining incentives, competitive bids, and preventive home improvements often reduces total system cost and improves long-term value.
Additional Resources And Where To Learn More
Information about specific Amana two-stage furnace models, installation guides, and warranty details is available on the Amana brand website and from local authorized dealers. Energy.gov and state energy offices publish rebate databases and guidance on efficiency programs.
For precise pricing, homeowners should request on-site estimates that include furnace model numbers, AFUE ratings, and a full scope of installation work.