Replacing an Amana evaporator coil typically costs $600-$3,500 depending on compressor compatibility, coil type, and access. Buyers usually pay $1,200-$1,800 on average for a standard single-family home; major drivers are coil size (tons), whether the coil is A-coil or coil-in-cabinet, and labor access.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Full Evaporator Coil Replacement | $600 | $1,500 | $3,500 | Includes part + labor; assumes 1.5-3 ton split system, moderate access |
| Replacement Coil Only (parts) | $250 | $700 | $1,800 | Depends on coil type and OEM vs aftermarket |
| Labor | $300 | $800 | $1,500 | $75-$150 per hour; 4-10 hours typical |
Total Price To Replace an Amana Evaporator Coil in a Typical Home
Most homeowners pay $1,200-$1,800 to replace an Amana evaporator coil in a 1.5-3 ton split system with standard access and no duct modification. Expect lower-end $600-$900 jobs when a common aftermarket coil fits and access is easy; expect $2,000-$3,500 for oversized coils, cabinet modifications, or matched OEM units.
Assumptions: Midwest labor rates, 2.5-ton system, refrigerant recovery included.
Materials, Labor, Equipment, and Disposal in a Typical Quote
| Materials | Labor | Equipment | Delivery/Disposal | Contingency |
|---|---|---|---|---|
| $250-$1,800 (coil only; OEM vs aftermarket) | $300-$1,500 ($75-$150/hour, 4-10 hours) | $50-$300 (vacuum pump, gauges, recover/recharge) | $50-$200 (old coil removal, refrigerant handling) | $100-$400 (cabinet mods, unforeseen repairs) |
Materials and labor are the largest line items; aftermarket coils reduce material cost but can add refrigerant matching work.
How Coil Size, Cabinet Type, and System Match Drive Price
Coil capacity and form factor strongly affect cost: 1-1.5 ton coils typically add $250-$600, 2-3 ton coils $400-$900, and 3.5-5 ton coils $700-$1,800. Replacing an A-coil inside an air handler or evaporator coil in a cabinet usually adds $200-$800 versus a simple drop-in coil due to cabinet modification.
Other thresholds: higher-efficiency or factory-matched TXV/expansion devices add $100-$350; if the outdoor unit is a different refrigerant or incompatible, match-up work adds $300-$1,200.
Practical Ways To Reduce Amana Evaporator Coil Replacement Price
Buyers can lower cost by selecting a compatible aftermarket coil, scheduling during off-season, and preparing the site for quick access. Providing clear access, removing attic insulation, or unbolting panels before the tech arrives can cut labor time and reduce the total bill by $100-$400.
- Accept an aftermarket coil when warranty/efficiency tradeoffs are acceptable.
- Bundle coil replacement with other HVAC work to reduce travel/minimum charge.
- Get three written quotes and confirm if refrigerant is included.
How Regional Market Differences Affect Replacement Price
Prices vary by region: coastal and urban areas run 10%-30% above the national average; rural Midwest and some Sun Belt markets are often 5%-15% below average. A $1,500 average in the Midwest may be $1,650-$1,950 in a major metro or $1,350 in lower-cost rural areas.
Example deltas: Urban premium +15%-25%; Remote service fee +$100-$300.
Common Add-Ons, Removal Fees, and Site Complications That Increase Price
Expect extra charges for cabinet modification ($200-$900), hard-to-access attic installs ($150-$600), refrigerant recharge beyond a standard amount ($100-$400), and refrigerant conversion or retrofitting ($300-$1,200). Disposal and refrigerant handling commonly add $50-$200 and are sometimes listed separately on estimates.
| Service | Typical Extra Charge | When Applied |
|---|---|---|
| Cabinet modification | $200-$900 | Coil size mismatch or sheet-metal changes |
| Attic/above-ceiling access | $150-$600 | Tight access, need for extra safety gear |
| Refrigerant recharge or reclaim | $100-$400 | Loss during swap or non-standard refrigerant |
Real-World Quote Examples With Specs and Pricing
Example 1: 2.5 ton split system, aftermarket A-coil, easy access — Parts $450, Labor $400, Equipment/fees $150 — Total $1,000.
Example 2: 3.5 ton factory-matched OEM coil, cabinet cut, attic access — Parts $1,200, Labor $900, Extras $300 — Total $2,400.
Example 3: 1.5 ton small condo unit, minimal access, refrigerant conversion needed — Parts $700, Labor $800, Conversion $450 — Total $1,950.